Results and Recommendations

Documenting Results 

The outcomes of this project must bybe a

distilledfully functional waste water totreatment getplant. maximumThe performancesystem ofmust accompany the batteryfollowing baseddocuments:

on

these
• System parameters:
  design guide
• System Installation guide
• User guide 
• Sludge collection and disposal guide

 

Testing the Electrocoagulation System

Pass DC power to the electrocoagulation system at different intervals of time of 4, 8 and 12 hours. At each time interval, measure the amount of sludge that is recovered from the sludge tanks and test the final water for TSS.

 

Sample report 

Electrolyte 1 [150 grams MGSO4 + 500 grams Alum + 1 liter of distilled water] - CHARGING/DISCHARGING

Percentage	Time	Time	Percentage
10%	00:10 hrs	1:00 hr	18%
20%	01:15 hrs	2:00 hr	28%
30% ----	02: 22 hrs	3:00 hr ----	34%
----- 100%	11:45 hrs	--- 12:00 hrs	100%

Notes:

• When starting the project, start with a fully saturated electrolyte in 1 liter of distilled water (max saturation electrolyte).  
• Reduce the saturation in subsequent trials by adding different quantities of distilled water to each trial. 

 

Publishing Recommendations

A detailed report of the recommendation must accompany the results. The recommendationrecommendations must specify the following:

• Quantity of chemicalspotable perwater literrecovered in the output chamber
• Quantity of distilledsludge waterrecovered from sludge trays
• FastestIdeal andvoltage slowestto chargingbe time
applied
• Fastestfor andmaximum lowest discharging time
• Energy density of the resultant batteryefficiency 
• Precautions on handling components, battery, chemicals, charging stations and testing and measuring equipment