Skip to main content

Generative Design

image37.jpg

Generative Design and BIM Design

https://www.reddit.com/r/bim/comments/cb6u7m/which_bim_software_should_i_use/

https://en.wikipedia.org/wiki/Building_information_modeling

https://www.reddit.com/r/Revit/comments/7lorct/revit_vs_graphisoft_archicad/ 

https://www.reddit.com/r/bim/

https://forums.autodesk.com/t5/inventor-forum/revit-vs-inventor-design-methods/td-p/3294147 

https://www.thenbs.com/knowledge/bim-dimensions-3d-4d-5d-6d-bim-explained

https://www.youtube.com/watch?v=bJTNhbVcBFk 

The basics about BIM

Building Information Modeling (BIM) is a digital representation of physical and functional characteristics of a facility. A BIM is a shared knowledge resource for information about a facility forming a reliable basis for decisions during its life-cycle; defined as existing from earliest conception to demolition

 

The goal of BIM is to centralize all the information on a single database of information. 

That database of information is usually data associated with different components of a 3D model of the building, so BIM is nothing else than sharing the same digital 3D models of a project between every possible team that will take part in the different stages of the lifecycle of a building, from the design stage, to the different maintenance needs until the very deconstruction of the building.

Those 3D models include data that define physical and functional characteristics of each component that is part of the building, and more importantly, defines relationships between different components in a way that if a property is changed in one of the components the model will automatically reflect how any other component is affected.

 

So if a project has well defined BIM models of a project, in a BIM designing software like Revit, not just the designers and architects can visualize the project in 3D (or even walk through in VR) but every other team that needs to interact with the project can use the exact same models to do their part before the building is deployed (engineering work, lighting design, calculate energy consumption, evaluate structural integrity) and after the building is deployed (maintenance, renovations, deconstruction).

Also, once you have your BIM project with the 3D models properly documented, you can export all sort of traditional and not so traditional documents:

The basics about Generative Design

Software for BIM design

The most widely used is Revit, part of the Autodesk suite https://www.autodesk.com/products/revit/overview

and it’s bigger competitor is Tekla https://www.tekla.com/ 

Revit uses something they name “BIM 360 Design” which is their solution in the cloud for everybody in the team to coordinate a BIM project, using Revit as the design software.

DRAFT: on the difference between Inventor and Revit https://forums.autodesk.com/t5/inventor-forum/revit-vs-inventor-design-methods/td-p/3294147 

 

Software for Generative Design

 

Autodesk Fusion 360 vs Autodesk Inventor

  • Fusion 360 is a cloud based solution (can be used anywhere and works on Windows + Mac), inventor works on Windows only. It seems as if with Fusion 360 you can do basically all it can be done in Inventor but the workflow is a bit different. Also for very complex projects it seems people still prefer Inventor over Fusion 360. Here are some comments on this:
    “Inventor and fusion have 2 different workflows/design philosophy. Inventor is like solid works - separate files for parts, assemblies... Fusion - bodies, components all whacked into one entity. Its like designing parts from assembly level. Personally I use both, depending on what I do. Quick parts for printing - fusion, machines with multiple parts, moving commoners and fixings, screws... - Inventor.”
    https://www.reddit.com/r/cad/comments/ahdipv/learning_fusion_360_vs_inventor/

  • Fusion 360 offers free use for personal / hobby use with some limitations. So it is nice to learn for free. But the free option doesn’t include generative design

Workflow with Inventor for generative design

https://www.youtube.com/watch?v=a7nRzOOVgB8

https://www.youtube.com/watch?v=kzPfC4lSY1I 

 

Inventor is used for all the design process. Fusion 360 is used for the generative design process.

 

A simplified workflow is this:

  1. Choose the piece of the model that you would like to see alternatives for using generative design technology.

  2. Locate all the assembly points and decide what is the geometry that has to be preserved exactly as it is because it has to fit with another piece of the model.

  1. Now analyze what are the “obstacle geometry”, that is the limits within which the piece needs to stay, so this will be geometry we generate to tell the generative process what has to be avoided.

  1. Configure the generative simulation

  2. Run the generative simulation to see all the possible designs.

 

More in detail workflow: 

  1. Design Space: 

Preserve geometry and obstacle geometry. This can be done either on Inventor first and then selected in Fusion 360 or it can be also done directly in Fusion 360. For example 

  1. Setup:

Generative simulation parameters

  • Loading conditions

We setup all our load cases. These are the conditions that the piece will face in real life: gripping force, gravity, etc. We can have several cases added, for different real life situations that the piece will have to deal with

  • Manufacturing types and materials

He are we establish:

  • Objective and limits. This indicates your mayor goal when the AI goes through possible generative options. For example maybe you want to minimize the mass used for the piece

  • Then you select all the possible manufacturing characteristics, this is because the piece design will have to comply with how your manufacturing process will work to make sure the piece can really be built with your manufacturing process.

 

  1. Explore and decide

  • We explore all the options generated and we make a decision based on the cost vs performance tradeoffs.

  1. Validate

  • Generative design creates solid editable CAD geometry that we can adjust, validate and postprocess. Then we can send it back to Inventor to use integrated with the rest of the model.

BIM dimensions

The BIM dimensions (4D BIM, 5D BIM, etc.) is a way of describing how extensive the BIM project is, adding more data with each new dimension. However there is no full consensus on definitions beyond 5D, but here are some general ideas:

 

  • 3D is the modeling information. 3- dimensional (x, y, z) geographical structure.

  • 4D includes time: timeline, scheduling and duration

  • 5D includes money: cost estimates

  • 6D sustainability and energy

  • 7D operations. Holistic facility management information for entire lifecycle

More information here https://www.united-bim.com/what-are-bim-dimensions-3d-4d-5d-6d-7d-bim-explained-definition-benefits/ and here https://en.wikipedia.org/wiki/Building_information_modeling#Purposes_or_dimensionality 

 

 

Revit + Inventor

Revit is not a replacement for Inventor. They are two different tools

  • Inventor is software for a more specific design process that usually involves mechanical design and therefore models not just the final look and dimensions of a component but absolutely all the little pieces and moving parts involved on achieving a movement or change

  • Revit is the central project where all the teams from different disciplines can go and look at 3D models of the building but each of the components do not need to go down to the “bolt and gear” level.

For this reason, 

Revit for BIM design

Working with Revit and BIM 360

 

Introduction https://www.youtube.com/watch?v=G7Q-aGgwSS4

 

Additional notes

Here is a video of an interesting big project built on ArchiCAD https://www.youtube.com/watch?v=D-tue-ZPThY 

 

Back to top